Dimmer Packs Rack Mounting Anytronics

Code: D610CB
Availability: Please select an option
  • Wall Mounting Dimmer Packs
  • Built-in Circuit Breakers
  • Dimming Or Switch Mode
  • DMX Or Analogue Control
  • Works With Inductive Loads
Please Select:
Connector Panel
From £695.00 inc VAT

Anytronics Series D610CB dimmer pack with DMX or analogue control. The pack will control six channels at a maximum load of ten amps per channel. There is individual circuit breaker protection on each channel and two connection options with 15 amp or IEC connections. Analogue inputs are set for 0-10volts with one 8 pin DIN socket wired for Anytronics and the other for Zero88 configuration. The dimmer will work with any standard DMX512 controller and the input is connected through a 5-pin XLR connector. This pack should only be installed by a qualified electrician.

200 - 240 V AC 50/60 Hz Single / 3 Phase Star
Max current: 2530 Watts per channel
Min load requirement: 60 W
Dimensions: 483 x 178 x 295mm
Weight: 9.7kg