12 Channel Contractor Dimming Switching Pack

Code: TRACT-12
Availability: Made to Order - Aprox. 14 days
  • Installation Dimmer Packs
  • Easy To Fit
  • Full DMX Control
  • Optional Analogue Input
  • Single Or Three Phase
£1280.00 inc VAT

Wall mounting dimmer packs designed with the installer in mind. These packs provide an excellent solution to any install situation. The packs are provided with mounting plates and plenty of outlet gland holes ready to accept cables. The whole process of installation becomes less of a headache, allowing any qualified electrician to fit the equipment with the minimum of fuss.
Features include:
• DMX 512 Digital input
• 0-10 Volt analogue input (Optional)
• Emergency lighting terminals for each channel
• Thermostatic cooling
• Channel test facility
• Dimming or switching on each channel
• The input supply can be three or single phase.
• Three phase with 4 channels per phase.
• Single phase with 12 channels.
• The supplied din rails limit the total continuous load to 150 Amps.
• Terminal inputs are provided for both DMX and the analogue control signals , if the analogue board is fitted.
• There is also an option to replace the supply terminal block with a 4 pole 63 Amp RCD. This can be specified at the time of ordering by adding Code: TRACT-R to your order. There will be an extra charge for this, as shown.

12 Channel dimmer pack
Max load per Channel: 2300 Watts
Dimensions: 440 x 447 x 163mm
Weight: 18kg
Mounting area: 550 x 500mm