A powerful 2 channel amplifier, delivering 900 watts per channel at 4 ohms.The Cobra APC power amplifier provides high dynamic reserves without compromising tonal quality. Proven linear power supply technology produces efficiency at any power level. The LED display clearly shows the status of temperature, fan speed, mode and volume levels. Internally the amplifier is cooled by two temperature control fans. The protection circuit is sophisticated with a soft-start function, DC protection, short circuit protection, heat protection and a input signal compressor to help reduce distortion. All connections can be found on the back panel. Speakers can be connected via Neutrik speakon connectors or binding posts. Input cables are connected via Neutrik XLR, with XLR link outputs to daisy chain multiple amplifiers. In addition there is an input sensitivity switch, hi-pass filter switch for speaker protection, a low-pass switch to use the amplifier for subwoofers and a mode switch.An ideal amplifier for permanent installation.
Model:ACP2400Power Output 8 Ohm: 600 Watt x2 Power Output 4 Ohm: 900 Watt x2 Power Output Bridged 8 Ohm: 1800 Watt x1 Frequency Response: (+/- 0.3dB) 20Hz-20000Hz Input Sensitivity: 0.775v/1v/1.4v Input Impedance: 20K Ohm Balanced/10k Ohm Unbalanced S/R Ratio: >80dB Damping Factor: >200 Cooling: Fan Cooling Inputs: Balanced XLR Outputs: Speakon/Terminal Power Supply: AC230v 50Hz Dimensions: 500 x 485 x 88mm 2U Weight: 22kg