Pre Mounted RGB 4 LED Par Can Lighting System

Availability: 1 In Stock
  • Powerful
  • Lightweight COB LED Par Bar
  • 4 x 36w COB RGB LED's
  • Exceptional High Light Output
  • IR Remote Included
  • Standalone
  • Master/Slave & DMX Modes
  • 2 Beam Angles
  • Standard 35mm Pole Adaptor
  • Optional Foot Controller Available
  • Supplied in Strong Flightcase
£349.00 inc VAT

Four 36 watt COB LED's on a bar. Cut down on messy cabling and use the JB Systems COB4BAR. The light uses the latest COB (chip on board) technology where the colour mixing is done at the LED itself so is superb. Suitable for many applications from school stage lighting to band mood setting. A foot controller can be purchased separately for bands and solo entertainers or a DMX controller can be connected when used for stage lighting. There are some built-in programmes so the bar can be used stand alone and 15 degree can be retor fitted for a tighter beam angle. A perfect replacement for conventional PAR56 cans with the advantage of low heat and power consumption. Two LED effect lights can be mounted on the top of the T-bar and powered from IEC sockets on the back of the bar. Supplied with an IR remote and a strong carry case.

Mains Input: 100-250Vac, 50/60Hz
Power Consumption: 120w
LED: 4 X 36w COB RGB
Beam Angle: 15 Degree (With Lens) 100 Degree (Without Lens)
Dimensions: 1000 x 82 x 320mm
Weight: 7.6Kg