24 CHANNEL CONTRACTOR DIMMING SWITCHING PACK

Product detail

Wall mounting dimmer packs designed with the installer in mind. These packs provide an excellent solution to any install situation. The packs are provided with mounting plates and plenty of outlet gland holes ready to accept cables. The whole process of installation becomes less of a headache, allowing any qualified electrician to fit the equipment with the minimum of fuss.

Features include:
DMX 512 Digital input
0-10Volt Analogue input (Optional)
Emergency lighting terminals for each channel
Thermostatic cooling
Channel test facility
Dimming or switching on each channel
Optional RCD

SPECIFICATION
The input supply can be three or single phase.
Three phase with 8 channels per phase.
Single phase with 24 channels.
The supplied din rails limit the total continuous load to 150 Amps.
Terminal inputs are provided for both DMX and the analogue control signals , if the analogue board is fitted.
There is also an option to replace the supply terminal block with a 4 pole 63 Amp RCD. This can be specified at the time of ordering.

24 Channel
Max load per Ch:10 Amps
Dimensions:H651 x W447 x D163
Weight:30Kg
Mounting area:760 x 500mm 
Product code : TRACT-24