5 CHANNEL INSTALLATION MIXER

Product detail

Designed with the installer in mind, although a good all round mixer also, the EM-550 is very compact and loaded with useful features. The inset rear connections and pre-set gain features will help overcome many of the standard problems encountered in small installations. Features include: Mixer for two mics, two Phono/Aux and eight line sources

Signal LED for each stereo channel

All operating modes are easy to read via LED displays

2 Separate Mic channels with input sensitivity control , 3 band EQ and On Air button

2 Talkover-functions: DB Control adjusts the attenuation; time Control adjusts the response

High quality and super smooth Dual Rail channel faders

3 Band master EQ and 10 way level meter

Headphones connection on the front panel

Cue Split/Cue Mix button (for headphones)

Booth and Rec Out via 2 phono-plugs

Booth switchable between mono and stereo

Additional Rec-Out-sockets on the front panel

2 Master outputs via balanced XLR-connectors, -10dBV and +4dBV switchable

Additional Master output via 2 RCA-plugs

Additional input on the front panel

Only 2 rack units high

Channels/Inputs: 5/12
Microphone: 1mV 47k Ohms
Phono: 3mV 47k Ohms
Line/Aux: 150mV100k Ohms
Output Level: 1.414 V
Headphones: 8 Ohms or more
Response: 20-20,000Hz
Distortion: <0.03%
S-N-ratio: >65dB
Tone Control:
Treble: 10KHz -12dB to + 12dB
Middle: 1KHz -12dB to + 12dB
Bass: 100Hz -12dB to + 12dB
Dimensions: 483 x 115 x 90mm
Weight: 2.5Kg 
Product code : EM-550