Using the newest efficient and powerful RGB COB LED's the Multiform cobobar VT-3004 is designed for powerful stage washers & stage show effects. The VT-3004 uses 4 x 20 watt RGB COB LED's for better colour mixing and reduced shadowing, as the mixing is done at the LED itself. For stage work it will provide a bright general wash when all the LED's are set to the same colour. Each LED can also be controlled independently, so that it will create a stunning chase blinder. Each panel can be turned by +/- 10 degrees, meaning this will extend the overall beam angle but can also narrow the beam angle as well. There are plenty of inbuilt patterns & these can be set in the sophisticated large display menu. There are 24 built in static colours, these are a combination of all the 4 LED panels producing the same colour or a combination of different colours from each of the 4 LED outputs. This is very useful for when the units are being used to up light or mood set. The colour scroll option allows for pre-set colours to be selected, in this mode up to 225 variations can be chosen and the user has the ability to dim them up & down. In auto mode up to 13 different programmes can be selected, some of these can be hard switch or fading. There is also adjustment of speed control and sound to light. For total ease of control a DMX controller would be recommended and there are 7 different DMX layouts to choose from. DMX is on 3 pin XLR's and power is on Neutrik powercons, this allows multiple units to be connected together easily. The bracket is multi-purpose so they can be attached to truss with a clamp or attached to any 35mm stand. The power cable & connector are sold separately.
Mains Input: 100-240Vac, 50/60Hz
Power Consumption: 85w
LED Per Panel: 20w Tri (5w Red, 7w Green & 7w Blue)
Beam Angle: 30 Degrees
Dimensions: 640 x 100 x 110mm