A unique 2 zone amplifier for use with the Hill IMA200 or in conjunction with other suitable mixers. The Hill IPA200 is a 2 channel amplifier for restaurant & shop installations. Each amplifier can deliver 80 watts RMS per channel so will be suitable for many background applications but will also still be loud enough for gyms and bar installations. Each amplifier can be a left or right amplifier or stereo signals can be summed independently for zoning situations. There are two volume controls on the front as well as 2 controls on the rear panel that will allow the installer or owner to pre-set maximum volumes and adjust bass/treble controls on installation. Each output is totally independent and they have switchable high pass filters at 40Hz or 100Hz. 40Hz will help protect drivers against low frequency damage while the 100Hz can be set when the IPA200 is used with external subwoofer equipment. Inputs can either be unbalanced phonos or balanced XLR's. For permanent installations there are screw terminals for inputs and outputs to cut down on unnecessary connectors. For larger installations multiple IPA200 units can be connected using 1/4 jacks.